Kontoor Brands, Inc.
Conflict Minerals Report
The information in this report includes the activities of Kontoor Brands, Inc. and its consolidated subsidiaries (herein referred to as “Kontoor Brands,” the “Company,” “we,” “us” or “our”). As used herein, “conflict minerals” or “3TG” are columbite-tantalite (coltan), cassiterite, gold, wolframite and the derivatives tantalum, tin and tungsten, without regard to the location of origin of the minerals or derivative metals. The “Conflict Minerals Rule” refers to Rule 13p-1 under the Securities Exchange Act of 1934, as amended, and Form SD.
Kontoor Brands has included this Conflict Minerals Report as an exhibit to its Form SD for 2019 as provided for in Rule 13p-1 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and Form SD (collectively, the “Conflict Minerals Rule”). The date of filing of this Conflict Minerals Report is May 26, 2020.
This Conflict Minerals Report can be found on the Kontoor Brands website at: https://www.kontoorbrands.com/investors.
Forward-Looking Statements
This document contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Exchange Act. In particular, statements contained in this document that are not historical facts, including, but not limited to, statements concerning the additional steps that Kontoor Brands intends to take to mitigate the risk that its necessary 3TG benefit armed groups, constitute forward-looking statements and are made under the safe harbor provisions of Section 27A of the Securities Act and Section 21E of the Exchange Act.
Forward-looking statements are subject to risks and uncertainties that could cause actual actions or performance to differ materially from those expressed in the forward-looking statements. These risks and uncertainties may include, but are not limited to, (1) the continued implementation of satisfactory traceability and other compliance measures by Kontoor Brands’ direct and indirect suppliers on a timely basis or at all, (2) whether smelters and refiners and other market participants responsibly source 3TG and (3) political and regulatory developments, whether in the Democratic Republic of the Congo (the “DRC”) or an adjoining country (collectively, the “Covered Countries”), the United States or elsewhere. Kontoor Brands cautions readers not to place undue reliance on any forward-looking statements, which only speak as of the date made. Kontoor Brands undertakes no obligation to update any forward-looking statement to reflect events or circumstances after the date on which such statement is made.
Kontoor Brands Overview; Applicability of the Conflict Minerals Rule
Kontoor Brands is a global lifestyle apparel company, with a portfolio led by two of the world’s most iconic consumer brands: Wrangler® and Lee®. Kontoor Brands designs, manufactures and distributes superior high-quality products that look good and fit right, giving people around the world the freedom and confidence to express themselves. Kontoor Brands is a purpose-led organization focused on leveraging its global platform, strategic sourcing model and best-in-class supply chain to drive brand growth and deliver long-term value for its stakeholders. In May 2019, Kontoor Brands completed its spin-off from VF Corporation to be an independent, publicly traded company. The spin-off included the Wrangler®, Lee® and Rock & Republic® brands, as well as the VF Outlet® business.
Our in-scope products for 2019 consisted of certain of our apparel and accessories products, which contain tin. Our in-scope products did not include tantalum, tungsten or gold. Many Kontoor Brands products do not contain any 3TG and, for those that do, 3TG content generally represents a small amount of the total materials content of the product. For example, 3TG may be found in items such as buttons, zippers, snaps and eyelets, although not all of these items are necessarily in-scope for purposes of our compliance.
We do not directly source 3TG from mines or smelters and believe that we are in most cases many levels removed from these market participants. However, through the efforts described in this Conflict Minerals Report, Kontoor Brands seeks to ensure its suppliers are sourcing responsibly.
Kontoor Brands does not seek to embargo 3TG sourced from the Covered Countries and encourages its suppliers to continue to source 3TG responsibly from the region.
Product Scoping; Reasonable Country of Origin Inquiry
Out of approximately 600 global suppliers, Kontoor Brands developed a list of suppliers and products determined potentially to be in-scope for purposes of our compliance with the Conflict Minerals Rule. We based our preliminary scoping determinations on our level of influence over the manufacturing process (in the case of products that we may have contracted to manufacture) and the potential use of 3TG in the products. We also determined which of our products and components were potentially in-scope for purposes of the Conflict Minerals Rule through product specifications and other information known to us concerning the composition of our products.
Based on our preliminary scoping, our outreach included 165 suppliers (collectively, the “Covered Suppliers”). After receiving and reviewing supplier responses, we determined that 6 of the 165 suppliers were potentially in-scope for 2019. We retained a third party (the “Service Provider”) to assist with supplier outreach and data validation of the responses received from Covered Suppliers. Some of the compliance activities described in this Conflict Minerals Report were performed by the Service Provider on our behalf in coordination with Kontoor Brands.
Kontoor Brands’ “reasonable country of origin inquiry” (“RCOI”) process was designed to identify its manufactured and contracted to be manufactured products that may contain necessary 3TG, and, if these are present, obtain transparency into the 3TG supply chain for such products, and, more generally, result in engagement from suppliers concerning responsible sourcing of 3TG. The specific goal of Kontoor Brands’ RCOI was to determine to a reasonable degree of certainty whether the 3TG in its relevant products originated in a Covered Country.
The results of our RCOI are discussed below in this Conflict Minerals Report and on Annex A. For our RCOI, to the extent applicable, we utilized the same processes and procedures that we established for our due diligence, in particular Steps 1 and 2 of the OECD Guidance (as defined below) design framework, which are described below in this Conflict Minerals Report.
Based on the results of our RCOI, we conducted due diligence for 2019. These due diligence efforts are discussed below.
Due Diligence Process
Our 3TG due diligence processes were based on the Organisation for Economic Co-operation and Development Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas, including the Supplement on Tin, Tantalum and Tungsten and the Supplement on Gold (Third Edition) (“OECD Guidance”). The OECD Guidance is an internationally recognized due diligence framework.
Our diligence measures included the following. These are not all of the discrete steps that were part of our due diligence.
i. OECD Guidance Step One: Establish Strong Company Management Systems
Kontoor Brands has established a management system, as described below, consisting of a framework of policies, procedures, processes and organizational structure that supports our efforts to ensure that our products do not contain 3TG that support conflict in the Covered Countries.
Conflict Minerals Policy
Our conflict minerals policy (the “Conflict Minerals Policy”) indicates that Kontoor Brands expects all suppliers of our products and materials to cooperate with our 3TG procedures. We further expect all suppliers to seek to purchase materials that contain 3TG from sources determined not to be involved in funding conflict in the Covered Countries.
Our Conflict Minerals Policy is publicly available on our website at https://s3.amazonaws.com/content.stockpr.com/kontoorbrands/files/pages/kontoorbrands/db/725/description/Kontoor+2019+Conflict+Minerals+Policy_final+draft.pdf. Our Conflict Minerals Policy also is sent to selected internal personnel. In addition, our Conflict Minerals Policy is included in our consolidated Global Responsible Materials Policy, which vendors are required to certify to annually. The consolidated Global Responsible Materials Policy is also included as part of our standard vendor Terms and Conditions, which are part of our purchase orders. The contents of our website are not incorporated by reference herein, and are not otherwise a part of this Conflict Minerals Report.
Internal Team; External Advisors
Kontoor Brands has a management system responsible for managing our 3TG compliance program (the “Program”). The Product Stewardship department and other subject matter experts in Kontoor Brands are directly responsible for management of the Program with members from our supply chain and legal departments. The team reports the progress of the Program and the responses to senior management and key internal stakeholders on a regular basis.
The Service Provider assisted in our due diligence activities. Kontoor Brands also utilizes specialist outside counsel.
Control Systems
Kontoor Brands has policies that include, but are not limited to, our Code of Business Conduct, which outlines expected behaviors for all Kontoor Brands employees, and our Global Compliance Principles, Terms of Engagement and Conflict Minerals Policy for our suppliers.
We use the Conflict Minerals Reporting Template (the “CMRT”) developed by the Responsible Minerals Initiative (“RMI”) to collect information from suppliers. This information is retained for at least five years. To provide better transparency within Kontoor Brands’ supply chain and to facilitate communication of policies and expectations, the Service Provider conducts outreach and collects diligence results through an online platform (the “Online Platform”).
Supplier Engagement and Education
Engagement with Covered Suppliers consisted of multiple communications through email, telephone, and in-person training to educate them on our expectations for sourcing 3TG and the requirements of the Conflict Minerals Rule. Covered Suppliers were provided various avenues to obtain additional information and guidance regarding our Program, including an online supplier education portal, and contact email addresses and telephone numbers for obtaining answers to questions and/or receiving guidance on completing our information requests.
Our standard vendor Terms and Conditions, which are part of our purchase orders, among other things, require our suppliers to provide us with information, certifications and other documentation concerning 3TG content and origin at product level specificity. The Company’s suppliers are required to acknowledge these standard Terms and Conditions in connection with every purchase order.
Grievance Mechanism
We have an Ethics Helpline through which employees, suppliers and other third parties can report violations of Kontoor Brands policies, including violations of our Conflict Minerals Policy. The number for the Ethics Helpline is (844) 476-9159. We have a strict policy against retaliation toward anyone for making a good-faith report of a potential violation of Kontoor Brands policies or the law or for participating in an investigation.
ii. OECD Guidance Step Two: Identify and Assess Risk in the Supply Chain
The Covered Suppliers were asked by email to complete a questionnaire to determine whether they were in-scope. The Service Provider then requested by email that the in-scope Covered Suppliers provide us with a completed CMRT at a “product level” declaration. The Service Provider followed up by email or phone with Covered Suppliers that did not respond to the request within a specified time frame. If, after these efforts, a Covered Supplier did not provide the requested information, an escalation process was initiated. The escalation process consisted of direct outreach by our personnel to the Covered Supplier. Responses were received from 100% of the Covered Suppliers.
The Service Provider reviewed the responses received from the Covered Suppliers based on its internally-developed written review criteria for plausibility, consistency and gaps. As part of that review, if a Covered Supplier indicated that there were no 3TG in the products or materials that it supplied to us, the Service Provider reviewed those responses for plausibility and Covered Suppliers were also given an opportunity to provide a certification of that determination. If any of seven different quality control flags were raised by the response, the Covered Suppliers were contacted by the Service Provider.
In addition to the Service Provider’s review, Kontoor Brands’ internal sourcing group performed an internal quality check for plausibility of responses. The internal sourcing group also evaluated the level of risk presented by each Covered Supplier, based on the amounts purchased from and the nature of the relationship with the supplier. Further outreach efforts were then prioritized according to the level of risk, to better ensure that we appropriately allocated our internal resources to focus on the most relevant Covered Suppliers. An additional verification step was added to validate responses from the top 10% of Covered Suppliers, based on product value and volume, that responded that their products or materials did not contain 3TG. This was in addition to the response validation performed by the Service Provider.
The Service Provider reviewed the smelters and refiners identified by the Covered Suppliers against those contained in its internal database. To the extent not in that database, it requested that the Covered Supplier confirm that the listed entity is a smelter or refiner.
For those completed responses that identified a smelter or refiner, the Service Provider also compared that information against the lists of Conformant and Active (as defined below), or the equivalent, smelters and refiners published by the RMI, the London Bullion Market Association (“LBMA”) and the Responsible Jewellery Council (“RJC”). Nineteen smelters and refiners identified by the Covered Suppliers as potentially having processed 3TG contained in our in-scope products were listed as Conformant. Certain Covered Suppliers that reported at a “company level” reported gold refiners to us. However, because our in-scope products do not contain gold, we have not listed in this Conflict Minerals Report the identified gold refiners.
If a Covered Supplier did not provide information concerning the processors of 3TG in its supply chain, the Service Provider requested information on the Covered Supplier’s suppliers. These suppliers, and subsequent tiers of suppliers as identified to the Service Provider, were then contacted by the Service Provider.
iii. OECD Guidance Step Three: Design and Implement a Strategy to Respond to Identified Risks
Kontoor Brands’ implementation team provides regular updates to senior management and other key internal stakeholders on the progress of due diligence and supplier responsiveness and any identified risks. We address any identified risks on a case-by-case basis. This flexible approach enables us to tailor the response to the risks identified. Depending upon the identified risk, we may cease doing business with the supplier, suspend business or require the supplier to commit to a corrective action plan.
To ensure suppliers understand and meet our expectations, we regularly communicate information and guidance regarding our Program through a number of channels, including an online supplier education portal and direct communication from our sourcing hubs.
We also took the measures identified elsewhere in this report to mitigate the risk that 3TG in our products benefit armed groups in the Covered Countries.
iv. OECD Guidance Step Four: Carry out Independent Third-party Audit of Supply Chain Due Diligence at Identified Points in the Supply Chain
We do not have direct relationships with 3TG smelters or refiners and, therefore, do not perform direct audits of these entities within our supply chain. Instead, in connection with our due diligence, for the identified smelters and refiners, the Service Provider consulted information concerning independent third-party audits of smelters and refiners made available by the RMI, the LBMA and the RJC. We utilize and rely on this information to assess smelter and refiner due diligence and to determine whether the smelter or refiner is Conformant with the applicable third-party conflict-free certification.
v. OECD Guidance Step Five: Report on Supply Chain Due Diligence
We file a Form SD and a Conflict Minerals Report with the Securities and Exchange Commission and make these filings available on our website.
Due Diligence Results
The following table summarizes the applicable smelter and refiner information provided by the Covered Suppliers. For 2019, we requested that the in-scope Covered Suppliers furnish us with a complete CMRT at a “product level” declaration, although not all Covered Suppliers provided information at that declaration level. See Annex A for a list of identified smelters and refiners and for additional information relating to the data presented in the table.
Our in-scope products consist of apparel products that contained tin. Our in-scope products did not include tantalum, tungsten or gold.
Due to our position in the supply chain, which is discussed earlier in this Conflict Minerals Report, we rely on our suppliers for accurate smelter and refiner information and our RCOI and due diligence measures do not provide absolute certainty regarding the source and chain of custody of the necessary 3TG contained in our in-scope products.
None of the necessary 3TG contained in our in-scope products were determined by us to directly or indirectly finance or benefit armed groups in the Covered Countries. However, we did not have sufficient information to conclude that any of our products were “DRC conflict free.” The terms “armed group” and “DRC conflict free” have the meanings contained in the Conflict Minerals Rule.
We endeavored to determine the mine or location of origin of the necessary 3TG contained in our in-scope products by requesting that the in-scope Covered Suppliers provide us with a completed CMRT and through the other procedures followed by us and the Service Provider that are described in this Conflict Minerals Report.
|
| | | |
Metal | Conformant | Active | On Reference List Only |
Tin | 19 | 0 | 0 |
Risk Mitigation and Future Due Diligence Measures
Kontoor Brands intends to further improve our due diligence measures by taking the following steps, among others:
| |
• | Continue to incorporate our compliance Terms and Conditions into appropriate new supplier contracts; |
| |
• | Continue to provide web-based and in-person training to and conduct outreach with suppliers to help them understand and satisfy Kontoor Brands’ 3TG compliance requirements; |
| |
• | Contact any identified smelters or refiners that are not Conformant to request their participation in obtaining a Conformant or equivalent designation from an industry program; |
All of these steps are in addition to the steps that the Company took with respect to 2019, which it intends to continue to take with respect to 2020 to the extent applicable.
Annex A
Capitalized terms used and not otherwise defined in this Annex have the meanings set forth in the Conflict Minerals Report of which this Annex is a part.
Smelters and Refiners
In connection with our RCOI and due diligence, the Covered Suppliers identified to us the smelters listed below as having potentially processed the necessary 3TG contained in our in-scope products in 2019. Please see the notes that accompany the table for additional information concerning the data in the table.
|
| | | |
Metal | Smelter Name | Smelter Country | Status |
Tin | China Tin Group Co., Ltd. | China | Conformant |
Tin | EM Vinto | Bolivia | Conformant |
Tin | Gejiu Yunxin Nonferrous Electrolysis Co., Ltd. | China | Conformant |
Tin | Guangdong Hanhe Non-Ferrous Metal Co., Ltd. | China | Conformant |
Tin | Malaysia Smelting Corporation (MSC) | Malaysia | Conformant |
Tin | Metallo Belgium N.V. | Belgium | Conformant |
Tin | Mineracao Taboca S.A. | Brazil | Conformant |
Tin | Minsur | Peru | Conformant |
Tin | Operaciones Metalurgicas S.A. | Bolivia | Conformant |
Tin | PT Artha Cipta Langgeng | Indonesia | Conformant |
Tin | PT Mitra Stania Prima | Indonesia | Conformant |
Tin | PT Refined Bangka Tin | Indonesia | Conformant |
Tin | PT Timah Tbk Kundur | Indonesia | Conformant |
Tin | PT Timah Tbk Mentok | Indonesia | Conformant |
Tin | Rui Da Hung | Taiwan | Conformant |
Tin | Thaisarco | Thailand | Conformant |
Tin | White Solder Metalurgia e Mineracao Ltda. | Brazil | Conformant |
Tin | Yunnan Chengfeng Non-ferrous Metals Co., Ltd. | China | Conformant |
Tin | Yunnan Tin Company Limited | China | Conformant |
The Company notes the following in connection with the above table:
| |
a) | Smelter status information in the table is as of March 11, 2020. |
| |
b) | “Conformant” means that a smelter or refiner has successfully completed an assessment against the applicable Responsible Minerals Assurance Process (“RMAP”) standard or an equivalent cross-recognized assessment. Included smelters and refiners were not necessarily Conformant for all of 2019 and may not continue to be Conformant for any future period. |
| |
c) | “Active” means that the smelter or refiner has committed to undergo an RMAP assessment, completed the relevant documents, and scheduled the on-site assessment. These may be in the pre-assessment, assessment or corrective-action phases of the assessment. The smelters and refiners on these lists are not yet Conformant. |
| |
d) | “On Smelter Look-Up Tab Only” means that a smelter or refiner is listed on the Smelter Look-up tab list of the CMRT, but is not listed as “Conformant” or “Active.” |
| |
e) | Smelter or refiner status and country locations reflected in the table are based solely on information made publicly available by the RMI, without independent verification by Kontoor Brands. |
Country of Origin Information
Kontoor Brands has endeavored to determine the mine or location of origin of the necessary 3TG contained in its in-scope products by requiring that the applicable Covered Suppliers provide it with completed CMRTs and through the other measures described in this Conflict Minerals Report. Where a smelter or refiner has been identified that is not Conformant, Kontoor Brands or the Service Provider also has reviewed public information, to the extent available, to try to determine the mine or location of origin of the 3TG processed by the smelter or refiner.
Based on information received from the Service Provider, the countries of origin of the newly-mined 3TG processed by smelters and refiners listed above may have included countries listed below (as well as possibly other countries). The countries below are sorted by risk level.
L1 - Argentina, Australia, Austria, Belgium, Bolivia, Brazil, Cambodia, Canada, Chile, China, Colombia, Czech Republic, Djibouti, Ecuador, Egypt, Estonia, Ethiopia, France, Germany, Guyana, Hong Kong, Hungary, India, Indonesia, Ireland, Israel, Ivory Coast, Japan, Kazakhstan, Kyrgyzstan, Laos, Luxembourg, Madagascar, Malaysia, Mexico, Mongolia, Morocco, Myanmar, Namibia, Netherlands, Nigeria, Peru, Philippines, Poland, Portugal, Republic of Korea, Russian Federation, Sierra Leone, Singapore, Slovakia, Spain, Suriname, Switzerland, Taiwan, Thailand, United Kingdom, United States, Uzbekistan, Viet Nam, Zimbabwe
L2 - Kenya, Mozambique, South Africa
L3 - Angola, Burundi, Central African Republic, Congo (Brazzaville), DRC - Congo (Kinshasa), Rwanda, South Sudan, Tanzania, Uganda, Zambia
The 3TG processed by the identified smelters and refiners also may have originated in whole or in part from recycled or scrap sources.